21mm round Ceramic capacitance pressure sensor 100bar
Ceramic capacitance pressure sensor car motor oil sensor new energy vehicle thermal management system sensor
Product description
Ceramic capacitance pressure sensor material selection of 96% ceramic, has strong corrosion resistance, impact resistance, high elasticity and other excellent characteristics, while the extremely high thermal stability of the ceramic makes its operating temperature range of-40℃ ~135℃.In the working process of the ceramic capacitance pressure sensor, it does not need to transfer the pressure through other media. The monitoring pressure acts directly on the ceramic diaphragm, and the electric capacity change between the base electrode and the diaphragm electrode is proportional to the pressure.When overload, the diaphragm reaches against the base without breaking. When the pressure recovers, its performance will not be affected, which completely solves the disadvantages of low-range overload failure. It is the replacement product of ceramic pressure resistance and diffusion silicon pressure sensor.
corrosion resistance, impact resistance, high stability, high temperature resistance and no la
⚫ operating pressure range: 0.5MPa ~ 4.5MPa
⚫ optional range 0.5/1/2/3.5/4.5MPa
⚫ operating temperature: -40℃ ~ 135℃
⚫ power supply voltage: 5 ±, 5%, V d c
⚫ is linear / repetitive: <1.0%VFS
⚫ temperature drift: <0.025% / VFS /℃
⚫ working medium: air, engine oil, brake oil, gasoline, diesel oil, airconditioning refrigerant, etc
⚫ car motor oil sensor
⚫ car brake system
⚫ car air conditioning system
⚫ new energy vehicle thermal management system
⚫ car inlet and exhaust system
⚫ screw air compressor, frequency conversion water pump system (water impact tolerance value, to do insulation)
⚫ Smart pressure cooker
⚫ commercial frequency conversion a
Name: NTY21100
Y: circular type,
F: Square type 21:
diameter 21mm
100: Pressure range of 100bar
| model | Pressure measurin  g range
| Overload  pressure
| Damage pressur e (MPa) | Measure capacitance capacity (pF) | Reference, capacitive capacity (pF) | Full Range Range of Capacity Changes (pF) | remar ks |
| NTY21005 | 0.5 | 0.9 | 1.35 | 23±4 | 15±2 | 5.5±2.5 | |
| NTY21010 | 1 0 | 1 8 | 2 5 | 23±4 | 15±2 | 5 5±2 5 | |
| NTY21020 | 2.0 | 3.65 | 5．0 | 23±4 | 15±2 | 5.5±2.5 | |
| NTY21035 | 3.5 | 5.25 | 7 | 23±4 | 15±2 | 5±2.5 | |
| NTY21045 | 4 5 | 6 75 | 8 5 | 23±4 | 15±2 | 5±2 5 | |
| NTF010 | 1.0 | 1.5 | 2.5 | 11±3 | 8.5±1.5 | 4±2 | |
| NTF020 | 2.0 | 3.0 | 5.0 | 11±3 | 8.5±1.5 | 4±2 | |
| NTF035 | 3 5 | 5 25 | 7 | 11±3 | 8 5±1 5 | 4±2 | |
| NTF045 | 4.5 | 6.75 | 8 | 11±3 | 8.5±1.5 | 4±2 | |
| | D1 (mm ) | D2 (mm ) | D3 (mm ) | D4 (mm ) | T1 (mm ) | T2 (mm ) |
| ruler, inch | 20.93 ±0.1 | 0.68 ±0.02 | 14±0.1 | 1.5±0.05 | 4.55 ±0.35 | .51±0.1 |
Suggestion: The inner diameter of the sealed O-ring is greater than 14.5mm
2. The square type pressure senosr
| | L1/(mm) | L2/(mm) | L3/(mm) | T1/(mm) | D2/(mm) | D3/(mm) | D4/(mm) |
| size | 14.7±0.1 | 12.5±0.1 | 12.7±0.1 | 2.3±0.15 | 0.5 | 1.4 | 1.6 |
Suggestion: the inner diameter of the sealed O-ring is greater than 7.5.mm, and the outer diameter is less than 12.0mm
1. Notes before use
Ceramic capacitance pressure sensors may be damaged beyond the service conditions described in this specification, such as harsh working environment or overpressure, and must follow the instructions of this specification when used.
2. Welding precautions
Ceramic capacitance pressure sensor is a combination of ceramic and metal.The thermoplasticity of the ceramic body itself is poor, and the response to the heat is relatively fast. Under the condition of urgent cold and urgent heat, the ceramic body is easy to crack or virtual welding.Recommended welding conditions: when manual welding, the maximum power of constant temperature dering iron is 25W, welding temperature 280~320℃, welding time 3S, welding times less than or equal to 3 times.The ons shall be welded on a 120 degree heating table.
3. Storage method
To maintain the weltability of the pins and ensure the packaging material in good condition, the recommended storage conditions are as follows: storage temperature: 5~40℃; storage relative humidity: below 70%RH. Ceramic capacitance pressure sensor soldability decreases over time, even under ideal storage conditions, and therefore should be used within half a year from the date of delivery.
Piezoresistive Ceramic pressure sensorProduct Features
● High accuracy and high stability
● Wide choice of measuring ranges
● Solid ceramic sensitive diaphragm
● Smart volume, easy for encapsulation
● Excellent shock and vibration resistance
● Excellent corrosion and abrasion resistance
● Low cost, extreme extensive application range
● Thermally compensated, wide-range operating temperature
Piezoresistive Ceramic pressure sensorApplication
REMARK:We also can supply this finsihed pressure sensor products.Fell free to connect us:
Email:cherryliu@taimihk.com
Mobile/whatsApp:+86 13538467125
FAQ
| 1. Q: When can we get the reply? |
| Any inquiries will be replied within 24 hours. |
| 2. Q: Can i have samples? |
| A: Yes. Sample is surely ok. We can even send you free sample and you should only pay for the freight fee. |
| 3. Q: What about minimum order quantity? |
| A: We have no limit for MOQ, so you can even buy only 1 piece. Welcome to buy sample to test first. |
| 4. Q: What about delivery time? |
| A: We will send sample to you within 3 days. |
| Production for big quantity needs 20 to 25 days. And it also depends on product and quantity. |
| 5. Q: What about terms of payment? |
| A: Payment terms: T/T, west Union, Paypal and L/C etc. |
| 6. Q: How you will send the goods to us? |
| A: We will send the goods to you by Air (DHL, Fedex, UPS, TNT) and Sea shipping etc. |
| 7. Q: Are you trading company or manufacturer ? |
| A: We are in China buzzer manufactory |
| 8. Q: Do you support OEM and ODM services? |
| A: Yes, surely support. we can customize products according to the drawing. |
| 9. Q: Can you provide driven circuit? |
| A: Yes, of course sure. |
| 10. Q: Can you solve technical problems for us? |
| A: Yes, Our Technical team will try our best to support you. |
Product Tags:
|
|
0.5% FS Ceramic Capacitive Pressure Sensor 0- 400Bar Car Motor Oil Pressure Sensor Images
|
